Standard Deployment Control System

CLEARING DTC [STANDARD DEPLOYMENT CONTROL SYSTEM]

CMDTC Self Test

1. Connect the M-MDS(IDS) to the DLC-2.

2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
a. Select "Module programming".

b. Select "All CMDTCs".

3. Verify the DTC according to the directions on the screen.

4. Press the clear button on the DTC screen to clear the DTC.

5. Switch the ignition to off.

6. Switch the ignition to ON and wait for 5 s or more.

7. Perform DTC inspection. Standard Deployment Control System

8. Verify that no DTCs are displayed.

ODDTC Self Test

1. Connect the M-MDS(IDS) to the DLC-2.

2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
a. Select "Module programming".

b. Select "Programmable Module Installation".

c. Select "RCM".

3. Verify the DTC according to the directions on the screen.

4. Press the clear button on the DTC screen to clear the DTC.

5. Switch the ignition to off.

6. Switch the ignition to ON and wait for 5 s or more.

7. Perform DTC inspection. Standard Deployment Control System

8. Verify that no DTCs are displayed.