Front Door Key Cylinder Switch Inspection

FRONT DOOR KEY CYLINDER SWITCH INSPECTION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Inner garnish Inner Garnish Removal/Installation

b. Front door trim Front Door Trim Removal/Installation

c. Front door speaker Front Door Speaker Removal/Installation

d. Front door glass Front Door Glass Removal/Installation

e. Front inner handle Service and Repair

f. Front door module panel Front Door Module Panel Removal/Installation

g. Front door latch and lock actuator Service and Repair

3. Move the rod of the door key cylinder switch in the direction of the arrow shown in the figure, and verify that the continuity is as indicated in the table.






- If not as indicated in the table, replace the front door latch and lock actuator.