Headliner: Service and Repair

HEADLINER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. A-pillar trim A-Pillar Trim Removal/Installation

b. Sunvisor Service and Repair

c. Map light Map Light Removal/Installation

d. Assist handle Service and Repair

e. Front scuff plate Front Scuff Plate Removal/Installation

f. Rear scuff plate Rear Scuff Plate Removal/Installation

g. B-pillar lower trim B-Pillar Lower Trim Removal/Installation

h. Adjuster anchor cover Front Seat Belt Removal/Installation

i. Upper anchor of the front seat belt Front Seat Belt Removal/Installation

j. B-pillar upper trim B-Pillar Upper Trim Removal/Installation

k. Sub-trunk Sub-Trunk Removal/Installation

l. Trunk end trim Trunk End Trim Removal/Installation

m. Third-row seat Rear - Third-Row Seat Removal/Installation

n. Third-row seat belt lower anchor installation bolt Third-Row Seat Belt Removal/Installation

o. Cargo compartment light Service and Repair

p. Trunk side trim

q. Second-row seat belt upper anchor installation bolt Second-Row Seat Belt Removal/Installation

r. Rear header trim Rear Header Trim Removal/Installation

s. C-pillar trim C-Pillar Trim Removal/Installation

3. Disconnect the antenna feeder No.2.






4. Disconnect the rear washer hose.

5. Disconnect the connector.

6. Remove the fasteners.






7. Take the headliner out from the opened liftgate.

8. Install in the reverse order of removal.