Knee Bolster Removal/Installation

KNEE BOLSTER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Driver-side front scuff plate Front Scuff Plate Removal/Installation

b. Driver-side front side trim Front Side Trim Removal/Installation

c. Side wall Side Wall Removal/Installation

d. Center console box Center Console Box Removal/Installation

e. Console panel Console Panel Removal/Installation

f. Center console Center Console Removal/Installation

g. Shift lever knob (MTX) Service and Repair

h. Selector lever knob (ATX) Automatic Transaxle Shift Mechanism Removal/Installation

i. Shift panel Shift Panel Removal/Installation

j. Front console Front Console Removal/Installation

k. Hood release lever Service and Repair

l. Driver-side lower panel Lower Panel Removal/Installation

3. Remove the bolts.






4. Pull the knee bolster in the direction of the arrow in the order of (1), (2) while detaching the tabs.






5. Remove the knee bolster.

6. Install in the reverse order of removal.