Front Console Removal/Installation

FRONT CONSOLE REMOVAL/INSTALLATION

ATX

CAUTION:
- When remove the front console, always make sure that it does not interfere with the heater control unit. Affix protective tape along the shaded area shown in the figure to prevent scratches and damage.

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Side wall Side Wall Removal/Installation

b. Center console box Center Console Box Removal/Installation

c. Console panel Console Panel Removal/Installation

d. Center console Center Console Removal/Installation

e. Selector lever knob Automatic Transaxle Shift Mechanism Removal/Installation

f. Shift panel Shift Panel Removal/Installation

3. Remove the service hole cover, then remove the screw A.






4. Pull the front console in the direction of the arrow in the order of (1), (2), (3), (4) and remove the front console while detaching the clip B.






5. Install in the reverse order of removal.

MTX

CAUTION:
- When remove the front console, always make sure that it does not interfere with the heater control unit. Affix protective tape along the shaded area shown in the figure to prevent scratches and damage.

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Side wall Side Wall Removal/Installation

b. Center console box Center Console Box Removal/Installation

c. Console panel Console Panel Removal/Installation

d. Center console Center Console Removal/Installation

e. Shift lever knob Service and Repair

f. Shift panel Shift Panel Removal/Installation

3. Remove the service hole cover, then remove the screw A.






4. Pull the front console in the direction of the arrow in the order of (1), (2), (3), (4) and remove the front console while detaching the clip B.






5. Install in the reverse order of removal.