Front Door Latch: Service and Repair

FRONT DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION

1. To access the glass installation bolt, adjust the position of the front door glass so that the height of the door glass towards the rear is approx. 105 mm {4.13 in}.






2. Disconnect the negative battery cable.

3. Remove the following parts:
a. Inner garnish Inner Garnish Removal/Installation

b. Front door trim Front Door Trim Removal/Installation

c. Front door speaker Front Door Speaker Removal/Installation

d. Front door glass Front Door Glass Removal/Installation

e. Front inner handle Service and Repair

f. Front door module panel Front Door Module Panel Removal/Installation

4. Disconnect the rod from the front outer handle.

5. Disconnect the rod from the front door key cylinder.

6. Remove the service hole cover.






7. Remove the bolt.






8. Remove the screws.






9. Remove the front door latch and lock actuator.






10. Install in the reverse order of removal.