Cowl: Service and Repair

COWL SIDE REINFORCEMENT REMOVAL [PANEL REPLACEMENT]

Symbol Mark







Removal Procedure

1. Drill the 29 locations indicated shown in the figure.







2. Remove the cowl side reinforcement.

COWL SIDE REINFORCEMENT INSTALLATION [PANEL REPLACEMENT]

Symbol Mark







Installation Procedure

1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.
2. Drill holes for plug welds before installing new parts.
3. After temporarily installing new parts, make sure the related parts fit properly.
4. Plug weld the 29 locations indicated shown in the figure while install the cowl side reinforcement.