Removal and Replacement

FRONT BUMPER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the fastener A.






3. Remove the screw B.






4. Remove the screw C.






5. Remove the bolt D.






6. Remove the fastener F.

7. Pull the front bumper in the direction of the arrow in the order of (1), (2) and (3).






CAUTION:
- The front bumper and front bumper slider are engaged firmly. If they are disengaged forcibly the bumper could fall and be damaged. Perform the servicing carefully when disengaging the front bumper from the front bumper slider.
- When disengaging the front bumper from the front bumper slider, the front bumper could fall and be damaged. Support the front bumper so that it does not fall.

8. Disconnect the front fog light connector. (Vehicles with front fog lights)

9. Remove the front bumper.

10. Install in the reverse order of removal.

11. Adjust the front fog light aiming. (Vehicles with front fog lights) Adjustments

Front Bumper Installation Note

1. Spread the front bumper ends apart.






2. Attach the front bumper to the body.

3. Press the front bumper connecting area in the direction of the arrow shown in the figure to engage with the front bumper slider.