Manual Transaxle Oil Inspection [C66M-R]

MANUAL TRANSAXLE OIL INSPECTION [C66M-R]

1. Park the vehicle on level ground.

2. Remove the aerodynamic under cover No.2. Aerodynamic Under Cover No. 2 Removal/Installation

3. Remove the oil level plug and gasket.






Tightening torque
- 39-59 Nm {4.0-6.0 kgf-m, 29-43 ft-lbf}

4. Verify that the manual transaxle oil is near the brim of the plug port.

- When the manual transaxle oil level is lower than the lower limit, add manual transaxle oil.

Manual transaxle oil grade
- API service GL-4

Manual transaxle oil viscosity
- SAE 75W-80

5. Install a new gasket and the oil level plug.

Tightening torque
- 39-59 Nm {4.0-6.0 kgf-m, 29-43 ft-lbf}

6. Install the aerodynamic under cover No.2. Aerodynamic Under Cover No. 2 Removal/Installation