Transaxle Case and Clutch Housing Disassembly

TRANSAXLE CASE AND CLUTCH HOUSING DISASSEMBLY

1. Disassemble the transaxle case component and clutch housing component in the order shown in the figure.











Oil Path Removal Note
1. Remove the oil path.






2. As shown in the figure, verify that the oil path connection area is not broken.
- If the oil path connection area is broken, replace the oil path.

Oil Seal Removal Note






1. Remove the oil seal using a flathead screwdriver.


Bearing Outer Race (Differential) Removal Note






1. Remove the bearing outer race (differential) from the transaxle case using the SST.






2. Remove the bearing outer race (differential) from the clutch housing using the SST.