Primary Shaft Component Disassembly

PRIMARY SHAFT COMPONENT DISASSEMBLY

1. Disassemble the primary shaft component as shown in the figure.











Ball Bearing (Transaxle Case Side) Removal Note






1. Set the primary shaft component and SSTs in a press as shown in the figure.
2. Disassemble the ball bearing using the press.

Clutch Hub (3GR/4GR) Removal Note






1. Set the primary shaft component and SST in a press as shown in the figure.
2. Remove from the clutch hub to the 3rd gear as a single unit using the press.

Clutch Hub (5GR/6GR) Removal Note






1. Set the primary shaft component in a press as shown in the figure.
2. Remove from the clutch hub to the 5th gear as a single unit using the press.

Ball Bearing (Clutch Housing Side) Removal Note






1. Set the primary shaft component in a press as shown in the figure.
2. Remove the ball bearing using the press.