Differential Disassembly

DIFFERENTIAL DISASSEMBLY

1. Perform the "DIFFERENTIAL BACKLASH ADJUSTMENT".(See DIFFERENTIAL BACKLASH ADJUSTMENT.)
2. Disassemble the differential in the order shown in the figure.











Tapered Roller Bearing Removal Note






1. Secure the differential in a vice.






2. Remove the tapered roller bearing (clutch housing side) using the SST.

NOTE: There is a groove in the differential case component for attaching the SST tab.






3. Using the SST, remove the tapered roller bearing (transaxle case side).

NOTE There is a groove in the differential case component for attaching the SST tab.

Ring Gear Removal Note






1. Secure the differential in a vice as shown in the figure.
2. Remove the ring gear bolts.
3. Tap the ring gear using a plastic hammer and remove the ring gear.

Pin Removal Note






1. Remove the pin using a punch.