Transaxle Case and Clutch Housing Assembly

TRANSAXLE CASE AND CLUTCH HOUSING ASSEMBLY

1. Perform the differential preload adjustment and select a shim of the appropriate thickness. (See BEARING PRELOAD ADJUSTMENT.)
2. Assemble the transaxle case component and clutch housing component in the order shown in the figure.






Bearing Outer Race (Differential) Assembly Note






1. Assemble the bearing outer race (differential) to the clutch housing using the SSTs.






2. Assemble the bearing outer race (differential) to the transaxle case using the SSTs.

Oil Seal Assembly Note






1. Assemble the oil seal using the SST.