Torque Converter Inspection

TORQUE CONVERTER INSPECTION

CAUTION: For the torque converter inspection, only an inspection for burning or seizure of the TCC clutch can be performed. For other malfunctions, on-vehicle inspection is required.











1. Assemble the turbine shaft to the torque converter.






2. With the torque converter secured by hand, rotate the turbine shaft.

A : Secure by hand

NOTE:
- When rotating the turbine shaft, a little force is required depending on the amount of ATF in the torque converter.
- If the turbine shaft cannot be rotated, burning or seizure of the TCC clutch can be considered, therefore replace the torque converter with a new one.






3. Remove the turbine shaft.