Oil Pump Disassembly

OIL PUMP DISASSEMBLY

Structural View






Disassembly Procedure











1. Remove the oil pump cover using the following procedure:.






1. Remove the bolts shown in the figure.






2. Remove the oil pump cover.






2. Remove the oil seal.






3. Remove the inner rotor.






4. Remove the outer rotor.






5. Remove the seal rings.

6. Clean the disassembled parts. (See AUTOMATIC TRANSAXLE CLEANING.)
7. Perform the following inspection and replace a malfunctioning part with a new one.
- Visual inspection of parts (See VISUAL INSPECTION OF PARTS)
- Oil pump inspection (See OIL PUMP INSPECTION)