Secondary Gear and Output Gear Assembly
SECONDARY GEAR AND OUTPUT GEAR ASSEMBLYStructural View
Assembly Procedure
1. Assemble a new taper roller bearing (converter housing side) using the following procedure:
CAUTION: Use a new taper roller bearing. If taper roller bearing with a deformed cage are reused, it may cause a transaxle malfunction.
NOTE: Taper roller bearing size: Inner diameter approx. 35.5 mm {1.398 in}
1. Apply ATF (ATF FZ) to the engagement area of the new taper roller bearing and output gear.
2. Using the SST and press, assemble the new taper roller bearing.
A : Press
2. Assemble the secondary gear using the following procedure:
1. Apply ATF (ATF FZ) to the engagement area (spline area) of the secondary gear and output gear.
2. Using the SST and press, assemble the secondary gear.
A : Press
3. Assemble the taper roller bearing (transaxle case side) using the following procedure:
NOTE: Taper roller bearing size: Inner diameter approx. 35 mm {1.378 in}
1. Apply ATF (ATF FZ) to the engagement area of the taper roller bearing and output gear.
2. Using the SST and press, assemble the taper roller bearing.
A : Press