Part 2

Low Clutch Clearance Measurement/Adjustment (Continued)











9. Install the SST.
10. Place a 98-196 N {10.0-19.9 kgf, 23.0-44.0 lbf} weight on the SST using the following procedure:

NOTE: Use a V-block as a weight.

1. Measure the weight of the weight placed on the SST.
2. Input the measured weight into the measurement/adjustment value input sheet.






3. Place the measured weight on the SST.

A : Weight (V-block)

CAUTION: To reduce error during the low clutch clearance measurement, place the weight near the center of the SST.

11. Perform the following calculation to calculate the correction value for the low clutch clearance.

NOTE: Because a wave spring is included in the low clutch, a correction value is required for the low clutch clearance according to the weight of the weight used during the low clutch clearance measurement.

Correction value of low clutch clearance (weight of unit is N) = (A - 90 N) x 0.00157 mm {0.0000618 in}
A : Weight of weight

Note
Example
A : Weight of weight is 150 N
Correction value of low clutch clearance = 150 N - 90 N) x 0.00157 mm {0.0000618 in} = 0.0942 mm {0.00371 in}

Correction value of low clutch clearance (weight of unit is kgf) = (A - 9.18 kgf) x 0.01540 mm {0.0006063 in}
A : Weight of weight

Note
Example
A : Weight of weight is 15.30 kgf
Correction value of low clutch clearance = 15.30 kgf - 9.18 kgf) x 0.01540 mm {0.0006063 in} = 0.0942 mm {0.00371 in}

Correction value of low clutch clearance (weight of unit is lbf) = (A - 20.23 lbf) x 0.00698 mm {0.0002748 in}
A : Weight of weight

Note
Example
A : Weight of weight is 33.72 lbf
Correction value of low clutch clearance = 33.72 lbf - 20.23 lbf) x 0.00698 mm {0.0002748 in} = 0.0942 mm {0.00371 in}

12. Perform the low clutch clearance measurement from Step 9 (2). (See Low Clutch Clearance Measurement.)