Fuel Pump Control Unit: Testing and Inspection

FUEL PUMP CONTROL MODULE INSPECTION [SKYACTIV-G 2.0]

1. Perform the KOEO self-test. KOEO/KOER Self Test

2. Verify that a fuel pump control module related DTC is detected. On-Board Diagnostic Test

- If DTCs are detected, repair the malfunctioning part according to the applicable DTC troubleshooting. Engine - DTC Table
- If a DTC is not detected, go to the next step.

3. Inspect the following:

- Fuel pump control module damage
- Fuel pump control module connector damage or corrosion

- If there is any malfunction, repair or replace the malfunctioning part.
- If there is no malfunction, replace the fuel control module. Service and Repair