Fuel Injector: Testing and Inspection

FUEL INJECTOR INSPECTION [SKYACTIV-G 2.0]

Resistance Inspection

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable. Removal and Replacement

3. Remove the plug hole plate. Plug Hole Plate Removal/Installation

4. Disconnect the fuel injector connector.

5. Inspect the resistance between fuel injector terminals A and B.






Fuel injector resistance
- 1.74-2.04 ohms [20 °C {68 °F}]

- If not within the specification, replace the fuel injector. Service and Repair