Manifold Pressure/Vacuum Sensor: Testing and Inspection

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR INSPECTION [SKYACTIV-G 2.0]

Voltage Inspection

1. Connect the M-MDS to the DLC-2.






2. Switch the ignition to ON.

3. Verify that the MAP sensor output voltage (PID: MAP) is within the specification. On-Board Diagnostic Test Component Tests and General Diagnostics

- If not as specified, replace the MAP sensor/IAT sensor No.2. Manifold Absolute Pressure (MAP) Sensor/Intake Air Temperature (IAT) Sensor No.2 Removal/Installation

Specification