Flywheel Inspection

FLYWHEEL INSPECTION

1. Perform the following procedures to inspect the flywheel.
- If there is any malfunction or it exceeds the maximum specification, replace the flywheel.






1. Inspect the surface that contacts the clutch disc for scratches, nicks, and discoloration.
- Correct slight scratches and discoloration using sandpaper.

2. Inspect the ring gear teeth for damage and wear.






3. Measure the runout of the surface that contacts the clutch disc using a dial gauge.

Flywheel maximum runout 0.10 mm {0.0039 in}