Cylinder Block Disassembly (I)

CYLINDER BLOCK DISASSEMBLY (I)

CAUTION: Do not disassemble the oil pump and water pump because it is a precision unit.

1. Disassemble in the order indicated in the table.






Flywheel (MTX), Drive Plate (ATX) Disassembly Note






1. Hold the crankshaft using the SST.

Rear Oil Seal Removal Note
1. Cut the oil seal lip using a utility knife.






2. Remove the oil seal using a flathead screwdriver with the tip protected by a clean cloth to prevent damage to the oil seal sliding part of the crankshaft.