Shift Solenoid F Inspection

SHIFT SOLENOID F INSPECTION [AY6A-EL]

CAUTION:
- Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector when disconnecting it.
- Do not damage the terminals.

On-Vehicle Inspection

1. Disconnect the negative battery cable.

2. Remove the fresh-air duct and air cleaner component as a single unit. Service and Repair

3. Remove the TCM. Service and Repair

4. Measure the resistance between coupler component terminals B16 and B21.











- If there is any malfunction, inspect the coupler component for continuity. Testing and Inspection
- If coupler component has no malfunction, perform the "Off-vehicle inspection".

Shift solenoid F specification





Off-Vehicle Inspection

Resistance inspection

1. Measure the resistance shift solenoid F terminals A and B.






- If there is any malfunction, replace the control valve body.

Shift solenoid F specification





Operation inspection

CAUTION:
- Do not apply battery positive voltage to terminals for more than 3 s.

NOTE:
- Because the operation sound of the shift solenoid F is small, perform inspection in a quiet place.

1. Connect the positive battery terminal to terminal B of shift solenoid F via the 12-21 W bulb and connect the negative battery terminal to terminal A of shift solenoid F.






CAUTION:
- Do not apply impact to shift solenoid F.
- Do not damage the terminals.

2. Verify that operating sound is heard from the shift solenoid F.

- If there is any malfunction, replace the control valve body.