Interior - Rattle From Door Panel(s) With High Audio Vol: Overview
Bulletin No.: 09-048/10Last Issued: 11/08/2010
Subject:
RATTLE NOISE FROM DOOR PANEL TRIM
APPLICABLE MODEL(S)/VINS
2011 Mazda2
DESCRIPTION
Some vehicles may exhibit a vibration or rattle type noise from the door panel trim when listening to the audio system with high volume.
Customers having this concern should have their vehicle repaired using the following repair procedure.
REPAIR PROCEDURE
1. Verify customer concern.
2. Determine which door(s) is causing the noise:
a. Place a hand on the suspected door panel(s) to isolate door with concern.
b. Apply hand pressure on different locations of the door panel with symptom to isolate location of noise.
3. Remove the door panel trim and apply the unwoven cloth to the area behind the trim where the noise is occurring.
NOTE:
Procedure "A" through "F", use the thinnest material (unwoven pad) from the Noise Parts Set kit.
PART(S) INFORMATION
WARRANTY INFORMATION
NOTE:
^ This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair.
^ This repair will be covered under Mazda's New Vehicle Limited Warranty term.
^ Additional diagnostic time cannot be claimed for this repair.