DTC Inspection - Audio

DTC INSPECTION [AUDIO]

NOTE:
- All DTCs displayed in the DTC inspection should be entered in the Audio Repair Order Form.

1. Switch the ignition to ACC or ON.

2. Turn the audio unit power to off.

3. While pressing the POWER/VOLUME switch, simultaneously press the FM/AM switch and the CD/AUX switch for 3 s or more.






NOTE:
- The DTC display switches as follows every 2 s.

- Malfunction detection time (Elapsed time from malfunction detection time is displayed in hour units.)
- Supplier code, DTC (Supplier code and DTC are displayed. DTC is composed of device code and error code.)
- Malfunction contents (Malfunctioning area is displayed.)

- If several DTCs are in the memory, they can be displayed using the TUNE/TRACK up switch or TUNE/TRACK down switch.

4. To stop the DTC inspection, ignition is switched to off.