Backup Lamp Switch: Service and Repair

BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [G66M-R]

1. Disconnect the negative battery cable.

2. Remove the aerodynamic under cover No.2. Aerodynamic Under Cover No.2 Removal/Installation

3. Drain the oil from the transaxle. Transaxle Oil Replacement - G66M-R

4. Disconnect the back-up light switch connector and remove the back-up light switch.






5. Install the back-up light switch (with a new gasket) to the transaxle case.

Tightening torque
- 20-29 Nm {2.0-2.9 kgf-m, 15-21 ft-lbf}

6. Add the specified amount and type of oil. Transaxle Oil Replacement - G66M-R

7. Install the aerodynamic under cover No.2. Aerodynamic Under Cover No.2 Removal/Installation