Secondary Shaft Gear Inspection
Secondary Shaft Gear Inspection1. Inspect the gear contact surface for damage and wear.
^ If there is any malfunction, replace the secondary shaft.
2. Inspect the splines for damage and wear.
^ If there is any malfunction, replace the secondary shaft.
3. Inspect the gear teeth for damage, wear, and cracks.
^ If there is any malfunction, replace the secondary shaft.
4. Inspect the oil passage for clogging.
^ If there is any malfunction, replace the secondary shaft.
5. Measure the shaft gear runout.
^ If it exceeds the maximum specification, replace the secondary shaft.
Secondary shaft gear maximum runout: 0.015 mm (0.0006 in)
6. Measure the clearance between the shaft gears and the gears.
^ If not within the specification, replace parts if necessary.
1st and 2nd gear oil clearance (mm (in))
