Clutch Hub Component Inspection
Clutch Hub Component Inspection1. Inspect the clutch hub sleeve and hub operation.
^ If there is any malfunction, replace parts if necessary.
2. Inspect the gear teeth for damage, wear, and cracks.
^ If there is any malfunction, replace parts if necessary.
3. Inspect the synchronizer keys for damage, wear, and cracks.
^ If there is any malfunction, replace parts if necessary.
4. Measure the clearance between the hub sleeve and shift fork.
^ If it exceeds the maximum specification, replace the hub sleeve and shift fork as a set.
1st/2nd clutch hub sleeve and shift fork clearance
Standard: 0.10 - 0.45 mm (0.004 - 0.017 in)
Maximum: 0.95 mm (0.037 in)