5TH/6TH Gear Thrust Clearance Preinspection

5TH/6TH GEAR THRUST CLEARANCE PREINSPECTION





1. Remove the rear cover.
2. Measure the 5th gear thrust clearance using a feeler gauge.
^ If it exceeds the maximum specification, inspect the contact surfaces of 5th gear and the clutch hub. Replace worn or damaged parts.

5th gear thrust clearance
Standard: 0.100 - 0.220 mm (0.0040 - 0.0086 in)
Maximum: 0.270 mm (0.0106 in)





3. Measure the 6th gear thrust clearance using a dial indicator.
^ If it exceeds the maximum specification, inspect the contact surfaces of 6th gear and the clutch hub. Replace worn or damaged parts.

6th gear thrust clearance
Standard: 0.100 - 0.220 mm (0.0040 - 0.0086 in)
Maximum: 0.270 mm (0.0106 in)