Rear Oil Seal Assembly Note
Rear Oil Seal Assembly Note1. Apply clean engine oil to the new oil seal lip.
2. Install the SST to the non-woven fabric side of the rear oil seal.
3. From the back side of the rear oil seal, verify that there is no damage or separation in the lip area of the rear oil seal.
4. Install the rear oil seal to the engine.
5. Tighten the rear oil seal bolts in the order as shown in the figure. (Except TRIBUTE (L.H.D.) Face-lifted model.)
Tightening torque
8-11 N-m (82-112 kgf-cm, 71-97 in-lbf)