No.3 Wheel Unit ID Registration Cannot Be Performed (TPMS Warning Light Flashes)

No.3 WHEEL UNIT ID REGISTRATION CANNOT BE PERFORMED (TPMS WARNING LIGHT FLASHES)

Caution:
^ Activate the wheel unit ID registration mode using the M-MDS, and perform the following steps if the TPMS warning light does not turn off after driving at 25 km/h (15.5 mph) or more for 10 min or more.

No.3 Wheel Unit ID Registration Cannot Be Performed (TPMS Warning Light Flashes):

Step 1-step 4:

Display Of M-MDS (Example)
Registered ID: OxAAAAAAAA, 0xBB131313131313, OxCCCCCCCC, and OxDDDDDDDD (AAAAAAAA, 1313131313131313, CCCCCCCC, and DDDDDDDD mean arbitrary numbers.) Unregistered ID: OxOOOOOOOO Tire pressure: aaa. kPa, bbb kPa, ccc kPa, ddd kPa (aaa, bbb, ccc, and ddd mean measurement value.)
^ The battery is removed, the stored' tire pressure is reset to 0 kPa.