Oil Seal Spring Assembly Note
Oil Seal Spring Assembly Note1. Assemble the oil seal spring with the identification color upward.
Spring Identification Color
Caution
^ It is possible that the identification color may not be visible when reusing the oil spring. In that case, assemble the rounded end towards the rotor side and the squared end upward.
^ Be careful when assembling the oil seal spring of the front and rear rotor since each spring of the engine front side and engine rear side are the same.
Note
^ Either one of the two rotation lock slots on the oil seal can be used as a reference.
^ Assemble the rounded end within 0-15 mm (00.59 in) away from the oil seal spring rotation lock.