[A26MX-R]

CLUTCH COVER INSPECTION [A26MX-R]





1. Measure the wear of the diaphragm spring fingers.
^ If it exceeds the maximum specification, replace the clutch cover.

Clutch cover diaphragm spring fingers maximum depth [A26MX-R] 0.6 mm (0.024 in)





2. Measure the flatness of the pressure plate with a straight edge and a feeler gauge.
^ If it exceeds the maximum specification, replace the clutch cover.

Maximum clearance of flatness of the pressure plate [A26MX-R] 0.3 mm (0.012 in)

3. When checking the diaphragm spring fingers, mount a dial indicator on the cylinder block.





4. Rotate the flywheel and check for misaligned diaphragm spring fingers.
^ If it exceeds the maximum specification, replace the clutch cover.

Clutch cover diaphragm spring fingers maximum misalignment [A26MX-R] 1.0 mm (0.039 in)