Air Bag: Tools and Equipment

INSPECTION OF SST (DEPLOYMENT TOOL)




1. Before using the SST (49 H066 002), inspect its operation.

Inspection Procedure

Step 1-Step 3:

1. Follow the steps above to inspect the SST (49 H066 002).
- If not as indicated in the table, replace the SST (49 H066 002) because it has a malfunction.

WARNING: Do not use a malfunctioning SST (49 H068 002), otherwise it could cause the air bag module or pre-tensioner seat belt to accidentally operate (deploy).

CAUTION: Because the permissible voltage for the SST (49 H086 002) is 12 V, do not connect a 24 V power source because it will damage the SST. Always connect only a 12 V power source.