Bushing (Rear Side) Installation Note

Bushing (Rear Side) Installation Note





1. Align the marks placed during removal and install the bushing.





2. Press the bushing in using the SSTs so that the clearance distance A-B is 15.5-17.5 mm (O.611-0.688 in).

Clip Installation Note
1. Wipe the grease off the ball joint stud.
2. Fill the inside of the new dust boot with grease.
3. Install the dust boot to the ball joint.
4. Install the clip using the SST.





5. Verify that the clip is installed securely to the groove.
6. Wipe off any excess grease.

Front Lower Arm Installation Note
1. Install the front lower arm rear side bushing part horizontally.
2. Install the front lower arm front side bushing part.