Low Clutch Piston Disassembly Note
Low Clutch Piston Disassembly Note1. Install the low one-way clutch inner race to the transmission case.
2. Install the low clutch drum to the transmission case correctly.
Warning: Using compressed air can cause dirt and other particles to fly out, causing injury to the eyes. Wear protective eye wear whenever using compressed air.
Caution: Applying compressed air to the assembled clutch pack for more than 3 s at a time will damage the seal. Do not apply compressed air for more than the aforementioned time when testing the system.
3. Apply compressed air to the part indicated in the figure and remove the low clutch piston.
Air pressure:
390 kPa (4.0 kgf-cm2, 57 psi) max.