Removal/Installation

OIL PUMP REMOVAL/INSTALLATION








1. Remove the timing belt.
2. Remove the timing belt pulley.
3. Remove the oil pan.
4. Remove the A/C compressor with the pipe still connected.
5. Remove the A/C compressor bracket.
6. Remove the generator.
7. Remove in the order indicated in the table.
8. Install in the reverse order of removal.

Oil Pump Removal Note





1. Remove the oil seal using a flathead screwdriver protected with a rag.

Oil Pump Installation Note





1. Apply clean engine oil to the new oil seal.
2. Push the oil seal slightly in by hand.
3. Press the oil seal in evenly using the SST.
4. Install anew O-ring.





5. Apply silicone sealant to the oil pump as shown in the figure.
Thickness: diameter 1 - 2 mm (0.040 - 0.078 inch)
6. Install the oil pump.
7. Cut away the portion of the silicone sealant that projects from the body toward the oil pan side.