Shift Solenoid: Service and Repair
SOLENOID VALVE REMOVAL/INSTALLATIONPressure Control Solenoid
1. Remove the engine cover.
2. Remove the battery cover.
3. Disconnect the negative battery cable.
4. Drain the ATF.
5. Remove the oil pan and gasket.
6. Disconnect the solenoid connector (2-pin).
7. Remove the fix plate.
8. Remove the pressure control solenoid.
9. Apply ATF to a new O-ring and install it on the solenoid valve.
10. Install the pressure control solenoid in the control valve body.
Tightening torque 6.9 - 8.8 Nm (71 - 89 kgf-cm, 62 - 77 inch lbs.)
11. Install the fix plate.
Tightening torque 6.9 - 8.8 Nm (71 - 89 kgf-cm, 62 - 77 inch lbs.)
12. Connect the solenoid connector (2-pin).
13. Install the oil pan and new gasket to a new oil pan installation bolts.
Tightening torque 7.0 - 9.0 Nm (72 - 91 kgf-cm, 63 - 78 inch lbs.)
14. Connect the negative battery cable.
15. Install the battery cover.
16. Install the engine cover.
17. Add ATF and, with the engine idling, inspect the ATF level and inspect for leakage.
18. Perform the time lag test and line pressure test.
19. Perform the road test.
Except Pressure Control Solenoid
1. Remove the engine cover.
2. Remove the battery cover.
3. Disconnect the negative battery cable.
4. Drain the ATF.
5. Remove the oil pan and gasket.
6. Disconnect the solenoid valve connector.
7. Remove the fix plate.
8. Remove the solenoid valve.
9. Apply ATF to a new O-ring and install it on the solenoid valve.
10. Install the solenoid valve in the control valve body.
11. Install the fix plate.
Tightening torque 6.9 - 8.8 Nm (71 - 89 kgf-cm, 62 - 77 inch lbs.)
12. Connect the solenoid valve connector.
13. Install the oil pan and new gasket to a new oil pan installation bolts.
Tightening torque 7.0 - 9.0 Nm (72 - 91 kgf-cm, 63 - 78 inch lbs.)
14. Connect the negative battery cable.
15. Install the battery cover.
16. Install the engine cover.
18. Perform the time lag test and line pressure test.
19. Perform the road test.