Clutch Operation Inspection
Clutch Operation InspectionWarning: Using compressed air can cause dirt and other particles to fly out, causing injury to the eyes. Wear protective eye wear whenever using compressed air.
Caution: Applying compressed air to the assembled clutch pack for longer than 3 seconds at a time will damage the seal. Do not apply compressed air for more than the aforementioned time when testing the system.
1. Inspect operation of the brake piston by applying compressed air as shown.
^ If the operation is abnormal, replace parts where necessary.
Air pressure:
390 kPa (4.0 kgf-cm2, 57 psi) max.