Disassembly/Assembly

SELECTOR LEVER DISASSEMBLY/ASSEMBLY





4 A/T





Sport A/T

1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.

DISASSEMBLY/ASSEMBLY NOTES
Connector Disassembly Note





1. Insert a thin piece of metal from the terminal side of the connector, and press down the terminal locking tab.
2. Pull the terminal out of the connector.

Cam Assembly Note
1. Loosely install the cam to the push rod.

Note:
^ Clearance can be reduced by turning the cam clockwise.





2. Adjust the clearance between the guide plate and the guide pin by turning the cam.
3. Install the selector lever knob and verify that the clearance is as specified.
^ If not, repeat from Step 2.
4. Remove the selector lever knob.





5. Apply grease to the cam as shown.