Hatch Back
SUNROOF UNIT REMOVAL/INSTALLATION1. Disconnect the negative battery cable.
2. Remove the headliner.
3. Remove the glass panel.
4. Disconnect the front and rear drain hoses from the sunroof frame.
5. Remove the roof harness from the sunroof frame.
6. Remove the bolts and nuts, and then remove the sunroof unit.
7. Install in the reverse order of removal.
8. Adjust the glass panel.
SUNROOF UNIT DISASSEMBLY
1. Bend the hook of the decoration link backward to remove the drip rail.
2. Remove the sunshade stopper.
3. Slide the sunshade backward, and remove it from the sunroof frame.
4. Remove the screw, and then remove the guide stopper.
5. Remove the lock washer using a tape-wrapped screwdriver.
6. Slide the decoration link backward, and remove it from the sunroof frame.
7. Remove the sunroof motor.
8. Slide the guide backward, and remove it from the sunroof frame.
9. Remove the screws.
10. Slide the drive unit forward, and remove it from the sunroof frame.
11. Remove the deflector.
12. Remove the sunroof relay.
SUNROOF UNIT ASSEMBLY
1. Install the sunroof relay.
2. Install the deflector.
3. Slide the drive unit backward, and install it to the sunroof frame.
4. Install the screws.
5. Slide the guide forward, and install it to the sunroof frame.
6. Move the guide by hand until it is in the tilted up position.
7. Move the guide by hand until notch comes between mark A and mark B.
8. Install the sunroof motor.
9. Slide the decoration link forward, and install it to the sunroof frame.
10. Install the lock washer.
11. Install the screw, and then install the guide stopper.
12. Slide the sunshade forward, and install it to the sunroof frame.
13. Install the sunshade stopper.
14. Bend the hook of the decoration link backward to install the drip rail.