Control Assembly: Service and Repair

CLIMATE CONTROL UNIT REMOVAL

1. Disconnect the negative battery cable.
2. Disconnect the air mix and airflow mode wires from each wire clamp and link.
3. Remove the center panel.




4. Remove the screws and the climate control unit.

CLIMATE CONTROL UNIT INSTALLATION

1. Install the climate control unit to the center panel.




2. Pass each wire through the following routes than connect to each unit.
3. Connect the climate control unit connectors.
4. Install the center panel.
5. Adjust the climate control unit wire.
6. Connect the negative battery cable.

CLIMATE CONTROL UNIT DISASSEMBLY/ASSEMBLY




1. Disassemble in the order indicated below.
1. Dial
2. Knob
3. Panel
4. Fan switch
5. Illumination bulb
6. Air mix wire (See Wire Disassembly Note) (See Wire Assembly Note)
7. Airflow mode wire (See Wire Disassembly Note) (See Wire Assembly Note)
8. Body

2. Assemble in the reverse order of disassembly.

Wire Disassembly Note




1. Disassemble the wires in the order indicated in the table.

Wire Assembly Note




1. Assemble the wires in the order indicated in the table.