Removal and Replacement

FRONT DOOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. To remove the front door hinge, remove the front fender panel.
3. To remove the checker, remove the door speaker.
4. Remove in the order indicated in the table.






5. Install in the reverse order of removal.
6. Adjust the front door.

Connector Removal Note






1. Push the rubber boot backward.
2. Pull the pin up.
3. Remove the rubber boot from the connector.

Connector Installation Note
1. Connect the connector and the rubber boot.
2. Push the pin down.
3. Install the rubber boot on the body.