Engine General Specifications

General engine specifications - KL
Compression check
Standard 1,300 kPa {13.3 kgf/cm2, 189 psi} [300 rpm]
Minimum 910 kPa {9.3 kgf/cm2, 130 psi} [300 rpm]
Maximum difference between cylinders
190 kPa {2.0 kgf/cm2, 28 psi}

Engine torque Specifications - KL
Crankshaft pulley bolt 157 - 166 Nm {116 - 122 ft-lbf}
Cylinder head bolts
Stage 1 (2 or 3 steps in sequence)
23.1 - 25.9 Nm {17.0 - 19.1 ft-lbf}
Stage 2 (In sequence) 85 - 95 °
Stage 3 (In sequence) 85 - 95 °
Camshaft cap bolts
Step 1 (in sequence) 11.3 - 14.2 Nm {100 - 125 in-lbf}
Step 2 (in sequence) 11.3 - 14.2 Nm {100 - 125 in-lbf}
Cylinder head cover (5 to 6 steps in sequence, then retighten bolts RH No. 5 and 6, LH No. 6 and 7); 6.87 - 9.80 (60.8 - 86.7 in-lbf)

Engine torque tightening sequences - KL