Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Distributor: Service and Repair

DISTRIBUTOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.




2. Remove in the order indicated in the table.
1. Connector
2. High-tension lead
3. Distributor

3. Install in the reverse order of removal.

DISTRIBUTOR DISASSEMBLY/ASSEMBLY




1. Disassemble in the order indicated in the table.
1. Distributor cap (See Distributor Cap and Rotor)
2. Rotor (See Distributor Cap and Rotor)
3. Packing
4. Ignition control module, ignition coil and camshaft position sensor

2. Assemble in the reverse order of disassembly.