Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Trunk Lid Cancel Switch

TRUNK LID CANCEL SWITCH REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.




2. Remove the trunk lid cancel switch cover by inserting a small tape-wrapped flathead screwdriver and carefully pry it off without scratching the trunk compartment covering.
3. Turn back the left side of trunk compartment covering. (See TRUNK COMPARTMENT COVERING REMOVAL/INSTALLATION.)




4. Remove in the order indicated below.
1. Connector
2. Fastener
3. Screw
4. Bracket
5. Trunk lid cancel switch (See Trunk Lid Cancel Switch Removal Note)

5. Install in the reverse order of removal.

Trunk Lid Cancel Switch Removal Note

1. Press the hooks of the trunk lid cancel switch.
2. Pull the trunk lid cancel switch out from the bracket.