Intake-Air System Removal/Installation
INTAKE-AIR SYSTEM REMOVAL/INSTALLATIONWARNING: When the engine and Intake-air system are hot, they can badly burn. Turn off the engine and wait until they are cool before removing or installing the intake-air system.
1. Disconnect the negative battery cable.
2. Drain the engine coolant from radiator.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
5. Refill the radiator with engine coolant.
Intake Manifold Component Removal Note
WARNING:
- Fuel vapor is hazardous. It can very easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.
- Fuel line spills and leaks are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete the "BEFORE REPAIR PROCEDURE".
- To remove the intake manifold component, remove the fuel distributor.
Intake Manifold Component Installation Note
- To install the intake manifold gasket, make sure that the convex side of gasket is faced to the intake manifold side.