Instrument Cluster Removal and Installation/Disassembly and Assembly
INSTRUMENT CLUSTER REMOVAL/INSTALLATION1. Disconnect the negative battery cable.
2. Remove the meter hood.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
INSTRUMENT CLUSTER DISASSEMBLY/ASSEMBLY
CAUTION: If the instrument cluster is dropped or damaged, the system will not operate properly and it may become the cause of trouble or malfunction.
1. Disassemble in the order indicated below.
1. Front glass
2. Window plate
3. Bulb
4. Screw
5. Print plate
6. Odometer/tripmeter switch lever
7. Display unit assembly
8. Warning lens
9. Case
2. Assemble in the reverse order of disassembly.