B-Pillar Lower Trim

B-PILLAR LOWER TRIM REMOVAL/INSTALLATION

WARNING: Handling the side air bag sensor improperly can accidentally deploy the side air bag module, which may seriously injure you. Read AIR BAG SYSTEM SERVICE WARNINGS before working around the B-pillar areas. (See AIR BAG SYSTEM SERVICE WARNINGS.)

NOTE: The side air bag sensor is located in the B-pillar.

1. Disconnect the negative battery cable.
2. Remove the front scuff plate.
3. Remove the rear scuff plate.




4. Bend sec. A-A to remove one side of the B-pillar lower trim.
5. Pull the B-pillar lower trim to disengage pin B from the body.
6. Install in the reverse order of removal.