Dashboard / Instrument Panel: Service and Repair
DASHBOARD REMOVAL/INSTALLATION1. Disconnect the negative battery cable.
2. Remove the driver-side air bag module.
3. Remove the passenger-side air bag module.
4. Remove the steering wheel.
5. Remove the column cover.
6. Remove the side wall.
7. Remove the front side trim.
8. Remove the under cover.
9. Remove the lower panel.
10. Remove the installation nuts then shift the assembled steering shaft in the dashboard. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)
11. Remove the PCM.
12. Remove the A-pillar trim.
13. Remove in the order indicated in the table.
14. Install in the reverse order of removal.
DASHBOARD DISASSEMBLY/ASSEMBLY
1. Remove the instrument cluster.
2. Remove the climate control unit.
3. Remove the audio unit.
4. Disassemble in the order indicated in the table.
5. Assemble in the reverse order of disassembly.